note: the openess of this wiki is intentional. thanks for the reminder though.
- Passive Poe Injektor
- Power Supply 12-48V
- simple Design
- 8 Port Patch Panel (11 euro)
- 4 x Ferrite Ring RT10-060-050 (a .45 euro)
- Led witth integrated Resistor + Socket (1.34 euro)
- DC Plug + Socket 2,8mm/5mm (2.38 euro)
- Our Patchpanel
first we drill the holes for the socket & led.
- Pin 1,2,3,6 are wired TIA568B
- Pin 4,5 are connected to + (red wires)
- Pin 7,8 are connected to - (black wires)
- power wires will be wound trough the Ferrite Ring
- shrink tube keeps the wires in place and gives a good look.
- finished wiring the Board.
- top right is the power Plug
- bottom right the power LED
- Board back in housing LED and Socket mounted.
- function Test
german version HowTo/passive_PoE